     |
 |
The Slitting Method for Residual Stress Measurement: : Links |
       |
Links to pages on residual stress measurement
The Contour Method. Measure a full cross-sectional map of residual stresses.
- A page on the slitting method from pioneers Weili Cheng and Iain Finnie
- Hill Engineering has a nice page on slitting measurements.
- A listing of upcoming conferences related to residual stress.
- Some information from the crack compliance pioneer Weili Cheng at his employer's site. Note that the first two figures show measurements on a valve seat done using plunge EDM, not wire EDM.
- Residual stress page at the UK's National Physical Laboratory.
- LANSCE - the Los Alamos Neutron Science Center uses Neutrons to measure residual stress
- Gary Schajer at UBC does research on the hole drilling method and residual stress
