I.V. Alexandrov,
Y.T. Zhu, T.C. Lowe, and R.Z.
Valiev, Severe plastic deformation: A new technique for powder consolidation
and grain size refinement, Powder Metallurgy, 41,
11-13 (1998).
I.V. Alexandrov, Y.T. Zhu, T.C. Lowe, R.K. Islamgaliev, and R.Z. Valiev, Consolidation
of Nanometer Sized Powders Using Severe Plastic Torsional Straining,
NanoStructured Materials, 10,
45-54 (1998).
V.V. Stolyarov, L.O. Shestakova, Y.T.
Zhu and R.Z. Valiev, Formation of Metastable States in Nanostructured
Commercial Al- and T-Based Alloys by SPTS Technique, NanoStructured
Materials, 12, 923-26 (1999).
V.V. Stolyarov, Y.T. Zhu, T.C. Lowe, and R.Z. Valiev, A Two-Step SPD Processing
of Ultrafine-Grained Titanium, NanoStructured
Materials, 11, 947-54 (1999).
V.V.
Stolyarov, Y.T. Zhu, T.C. Lowe, and R.Z. Valiev, Processing Nanocrystalline
Ti and its Nanocomposites from Micrometer-Sized Ti Powder Using High Pressure
Torsion, Mater. Sci. Eng.,
A282, 78-85(2000).
V.V. Stolyarov, Y.T. Zhu, I.V. Alexandrov, T.C.
Lowe and R.Z. Valiev, Influence
of ECAP Routes on the Microstructure and Properties of Pure Ti, Mater. Sci. Eng., A299, 59-67
(2001).
V.V. Stolyarov, Y.T. Zhu, T.C. Lowe and R.Z.
Valiev, Microstructure and Properties of Pure Ti Processed by ECAP and
Cold Extrusion, Mater. Sci. Eng.,
A303, 82-89
(2001).
Y.T. Zhu, H. Jiang, J. Huang and T.C. Lowe, A New Route
To Bulk Nanostructured Metals, Metallurgical
and Materials Transactions, 32A,
1559-62 (2001).
V.V. Stolyarov,
Y.T. Zhu, T.C. Lowe and R.Z.
Valiev, "Microstructures and Properties of Ultrafine-Grained Pure
Ti Processed by ECAP and Cold Deformation," J. Nanoscience and Nanotechnology, 1, 237-42 (2001).
Y.T. Zhu, J. Huang, H. Jiang,
and T.C. Lowe, Processing of Bulk Nanostructured Copper by Repetitive
Corrugation and Straightening (RCS), Innovation in Processing and Manufacturing
of Sheet Metals, edited by M.Y. Demeri, 2001, pp. 175-82.
D.H. Shin, I. Kim, J. Kim and Y.T.
Zhu, Shear Strain Accommodation during Severe Plastic Deformation
of Titanium Using Equal Channel Angular Pressing, Mater. Sci, Eng. A334, 239-245 (2002).
V.V. Stolyarov, Y.T. Zhu, I.V. Alexandrov, T.C.
Lowe and R.Z. Valiev, Grain
Refinement and Properties of Pure Ti Processed by Warm ECAP and Cold Rolling
Mater. Sci. Eng. A, A343, 43-50
(2003).
Y.T. Zhu, Yu.R.
Kobolov, G.P. Grabovetskaya, V.V. Stolyarov, N.V. Girsova, and R.Z. Valiev,
Microstructures and Properties of Ultrafine-grained Ti Foil processed
by ECAP and Cold Rolling, J. Mater. Research 18,
1011-1016 (2003).
J.Y Huang, Y.T.
Zhu, D.J. Alexander, X.Z. Liao, T.C. Lowe, R.J. Asaro, Development of Repetitive Corrugation
and Straightening,
Mater. Sc. Eng. A (in press).
I.V. Alexandrov, Y.T. Zhu, T.C. Lowe, R.K. Islamgaliev, and R.Z. Valiev, Microstructure
and Properties of Nanocomposites Obtained through SPTS-Consolidation of Powders,
Metallurgical and Materials Transactions,
29A, 2253-60 (1998).
V.V. Stolyarov,
I.V. Alexandrov, Yu.R. Kolopov, M. Zhu, Y.T. Zhu, T.C. Lowe, R.Z. Valiev,
Fatigue Behaviour of CP Nanostructured Titanium Processed by Severe Plastic
Deformation, Proceedings of the Seventh Inernational Fatigue Congress, Beijing,
China. Edited by X.R. Wu and Z.G. Zhang. Higher Education Press, 1999, 247-52.
H.
Jiang, Y.T. Zhu,
I.V. Alexandrov, T.C. Lowe, and
R.Z. Vasliev, Evolution of Microstructures and Microhardness of SPTS-Processed
Cu and Their Thermal Stability,
Advanced Materials for the 21st
Century, Proceedings of a Symposium to Honor Prof. Julia R. Weertman,
edited by Y-W Chung, D.C. Dunand, P.K. Liaw and G.B. Olson, TMS, 1999, pp.
487-97.
H.
Jiang, Y.T. Zhu, D.P. Butt, I.V.
Alexandrov, and T.C. Lowe, Microstructural
Evolution, Microhardness and Thermal Stability of HPT-Processed Cu, Mater.
Sci. Eng., A290, 128-38 (2000).
V.V. Stolyarov, Y.T. Zhu, I.V. Alexandrov, T.C.
Lowe and R.Z. Valiev, Influence
of ECAP Routes on the Microstructure and Properties of Pure Ti, Mater. Sci. Eng., A299, 59-67
(2001).
R.Z.
Valiev, I.V. Alexandrov, Y.T. Zhu,
T.C. Lowe, Paradox of strength and ductility in metals processed by severe
plastic deformation, J. of Materials
Research, 17, 5-8 (2002).
Y.T. Zhu and J. Huang, Properties
and Nanostructures of Materials Processed by SPD techniques, Ultrafine Grained Materials II, edited
by Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran, and T.C.
Lowe. TMS, 2002, pp. 331-340.
X.Z.
Liao, J. Huang, Y.T. Zhu, F. Zhou
and E.J. Lavernia, Defect structures and deformation mechanisms of a nanostructured
Al-Mg alloy prepared by cryogenic ball milling, Ultrafine Grained Materials II, edited
by Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran, and T.C.
Lowe. TMS, 2002, pp323-330.
I. Kim, J. Kim, D.H. Shin, X.Z. Liao, and Y.T. Zhu, "Deformation Twins
in Pure Titanium Processed by Equal Channel Angular Pressing," Scripta
Mater., 45, 813-17 (2003).
J. He, K.H. Chung, X.Z. Liao, Y.T. Zhu, and E.J. Lavernia. Mechanical Milling Induced Deformation Twinning in FCC Materials with High Stacking Fault Energy, Metallurgical and Materials Transactions 34A, 707-712 (2003).
J. Gubicza, I.C. Dragomir,
G. Ribαrik, Y.T. Zhu, R.Z. Valiev and T. Ungαr, Characterization of Microstructure of severely deformed
titanium by X-ray diffraction profile analysis, Mater. Sci. Forum 414-415, 229-234 (2003).
Y.T.
Zhu, Yu.R. Kobolov, G.P. Grabovetskaya, V.V. Stolyarov, N.V. Girsova, and
R.Z. Valiev, Microstructures and Properties of Ultrafine-grained
Ti Foil processed by ECAP and Cold Rolling, J. Mater. Research
18, 1011-1016 (2003).
J.Y. Huang, X.Z. Liao, Y.T.
Zhu, F. Zhou, and E.J. Lavernia, Grain Boundary Structures of Nanostructured
Cu Processed by Cryomilling, Phil.
Mag. 83, 1407-1419 (2003).
F. Zhou, X.Z. Liao, Y.T. Zhu, S. Dallek, and E.J. Lavernia, Microstructural
Evolution during Recovery and Recrystallization of a Nanocrystalline Al-Mg
Alloy Prepared by Cryogenic Ball Milling, Acta Mater. (in press).
Y.T.
Zhu, J.Y.
Huang, J. Gubicza, T. Ungαr, Y.M. Wang, E. Ma, R.Z. Valiev, Nanostructures
in Ti Processed by Severe Plastic Deformation, J. of Materials Research (in
press).
V.V.
Latysh, R.Z. Valiev, Y.T. Zhu, Mechanical properties of nanostructured
titanium alloys processed using severe plastic deformation, Proceedings
of Ti99, in press.
Sven
Vogel, Irene J. Beyerlein, Mark A. M. Bourke, Carlos Tomé, Partha Rangaswamy,
Cheng Xu, Terence G. Langdon. Texture in Equal-Channel Angular Pressed
Aluminum and Nickel, Materials Science Forum. 408-412. pp. 673-678.
Y.T. Zhu and T.C. Lowe, Observations
and Issues on Mechanism of Grain Refinement During ECAP Process,
Mater. Sci. Eng., A291, 46-53
(2000).
I.J. Beyerlein, R.A. Lebesohn, and C.N. Tome, "Modeling Texture
and Microstructural Evolution in the Equal Channel Angular Extrusion Process,"
Mater. Sci. Eng. A345, 122-138 (2003).
J.
Huang, Y.T. Zhu, H. Jiang and
T.C. Lowe, Microstructures and Dislocation Configurations
in Bulk Nanostructred Cu Processed by Repetitive Corrugation and Straightening,
Acta Mater., 49, 1497-1505 (2001).
R.Z. Valiev, I.V. Alexandrov, Y.T.
Zhu, T.C. Lowe, Paradox of strength and ductility
in metals processed by severe plastic deformation, J.
of Materials Research, 17,
5-8 (2002).
J.Y. Huang, X.Z. Liao, Y.T. Zhu,
F. Zhou, and E.J. Lavernia, Grain Boundary Structures
of Nanostructured Cu Processed by Cryomilling, Phil.
Mag. 83, 1407-1419 (2003).
V.V. Stolyarov, V.V. Latysh, R.Z. Valiev, Y.T. Zhu and T.C. Lowe, Investigation and Application of Severe Plastic Deformation, NATO Science Series, High Technology 80, Kluwer Academia Pub., 2000, pp. 367-73.
V.V. Stolyarov,
V.V. Latysh, R.Z. Valiev, Y.T. Zhu, and T.C. Lowe, The Development of
Nanostructured SPD Ti for Medical Application, Investigations
and Applications of Severe Plastic Deformation, edited by T.C. Lowe and
R.Z. Valiev, Kluwer Academia Pub., Dordrecht, 2000, pp. 367-72.
T.C. Lowe and
Y.T. Zhu, Commercialization of Nanostructured Metals Produced by Severe
Plastic Deformation Processing, Advanced Engineering Materials
(in press).
Y.T. Zhu
and D.P. Butt, Nanomaterials by Severe Plastic Deformation, Encyclopedia
of Nanotechnology, to be published by American Scientific Publisher (in
press).