Licensable Technologies : Materials
3D MEMS Fabrication Technique
Acoustic Levitator / Concentrator
Adjustable DC and Pulsed Circuit Fault Current Limiter
Air Breathing Direct Methanol Fuel Cell
Aligned-Crystalline Silicon Film on Glass
Antithrombogenic and Antibiotic Compositions and Methods of Preparation Thereof
Apparatus for Measurement of Critical Current in Superconductive Tapes (Cryogenic Linear Translator)
Architecture for High Critical Current Superconducting Tapes
Biaxially-Oriented Oxide Film on Polyimide
Biaxially-Oriented Silicon Film on Conducting Layer on Metal Tape
Biaxially-Oriented Silicon Film on Polycrystalline/Amorphous Template
Capacitively Coupled RF Diamond-Like-Carbon Reactor
Carbon Nanotube Separations by Electronic Type and Chirality
Carrier Multiplication in Quantum-Confined Semiconductor Materials
CATALYST INKS AND METHOD OF APPLICATION FOR DIRECT METHANOL FUEL CELLS
Cathode Catalyst for Direct Methanol Fuel Cells
Chemical Synthesis of Water-Soluble, Chiral Conducting Polymer Complexes
COMBUSTION SYNTHESIS OF NANO-STRUCTURED METAL FOAMS
COMPLEX GRAPHITIC STRUCTURES BY DESIGN
Continuous Processing of Ultrafine Grained Materials by ECAP-Conform
Corrosion Test Cell for Bipolar Plate Materials
DYPAK: A Porous Membrane Material for Use as Structured Packing in Distillation
Efficient Direct Methanol Fuel Cell Stack
Electrodes for Solid State Gas Sensor
Enhanced methanol utilization in direct methanol fuel cell
Fuel Cell Membrane Humidification
Fuel Cell with Interdigitated Porous Flow-Fields
Fuel Cell with Metal Screen Flow-Field
Gold Coated Nanoparticles for Biotechnology Applications
Hafnium Radioisotope Recovery from Irradiated Tantalum
High Power Density Direct Methanol Fuel Cell Stack Design
High Temperature Superconducting Composite Conductor and Method for Manufacturing the Same
High-Rate Buffer Layer for IBAD MGO Coated Conductors
Hybrid Catalyst for Selective Catalytic Reduction of NOx
Hydrogen Scavengers
Hydrogen-Evolving Organic Compunds
Long Carbon Nanotube Arrays for Fiber Spinning
Manufacturing Ultra-Tall Carbon Nanotube Forests
Mechanical Locking and Spray Shadowing for Stress Relief in Thick Plasma Sprayed Coatings
Membrane Architectures for Ion-Channel Switch-Based Electrochemical Biosensors
Membrane Catalyst Layer for Fuel Cells
Meniscus Membranes for Separations
Methanol Sensor Operated in a Passive Mode
Method and Apparatus for Depositing a Coating on a Tape Carrier
Method for Determining Current Densities Using External Magnetic Field Measurements
Method for Implantation of High Dopant Concentrations in GaN
Method For Producing Fluorinated Diamond-Like Carbon Films
Method for Producing Ultrafine-Grained Materials Using Repetitive Corrugation and Straightening
Method of Transferring an Ultra-Thin Layer of Crystalline Material with High Crystalline Quality
Method of Transferring an Ultra-Thin Layer of Crystalline Material With High Crystalline Quality
Method of Transferring an Ultra-Thin Layer of Crystalline Silicon with High Crystalline Quality
Method of Transferring Strained Semiconductor Structures
Methods for Segmenting Coated Conductor Tape for Reduced AC Losses
Multifunctional Nanocrystals
Multiple Feed Powder Splitter
Nanoparticle Cerium Doped Lathanum Bromide (Ce:LaBr3) and the Process of Making the Same
New Architecture for Coated Conductors
Non-Contact Pumping Of Light Emitters Via Non-Radiative Energy Transfer
Ordered Nanocomposite Silica Films for Matrix-Free Mass Spectrometry
Polyaniline-Based Optical Ammonia Detector
POLYMER-ASSISTED DEPOSITION (PAD) OF FILMS
Polymer-Assisted Depositions of Nitride Films
Polymer-Doped Nanocomposite Silica Thin Films
Polyolefin Oil/water Separator
Preparation of Fibers From a Supported Array of Nanotubes
Quantum Dot Optical Amplifiers and Lasers
Quantum Dots Incorporated into Thin Films
Reversible Modification of Carbon Nanotube Electronic Properties for Sensors and Electronics Applications
Simplified Architecture for Coated Conductors
Solid State Oxygen Sensor
Solid State Oxygen Sensor (I)
Spherical Boron Nitride Particles and Method for Preparing Them
Stable, Concentrated Solutions of Polyaniline Using Amines as Gel Inhibitors
Synthesis of Bipbsrcacuo Superconductor
Synthesis of Carbon Nanotube Cotton
Synthesis of Zeolites in Reverse microemulsions, HighAspect RatioCrystals, and Novel Materials.
Tape Casting Method for the Manufacture of Sensors
Technology for Fabrication of a Micromagnet on a Tip of a MFM/MRFM Probe
Thermally Tolerant Multilayer Metal Membrane
Thin Film Mixed Potential Sensors
Titanium-tantalum Alloys
Use of 2 4 8 10 Tetranitro 5h Pyrido 3 2 4 5 1 2 3 Triazolo 1 2 A Benzotriazol 6 Ium Inner Salt as a Thermally Stable High Explosive
Use of 4,4 6,6-tetra(azido)azo- 1,3,5-triazine and 3,6-di(azido)-1,2,4,5-terazine to prepare carbon nitrides and nano-materials
UV Absorbent Nanomaterials
Variable Impulse Explosive Device Using Microwave Energy and Microwave Sensitized Explosives
Waveguide-Based Optical Chemical Sensors
Wide band gap semiconductor templates
Los Alamos National Laboratory • Est 1943
