Los Alamos National LaboratoryGo to the Lab's home pageSearch for people in the Lab's directorySearch the Laboratory's Web site

Newsbulletin Home

Currently 34°F

Newsbulletin home

Fire Danger Rating:
Extreme

Tuesday, Feb. 1, 2005

Submit new announcements to
newsbulletin@lanl.gov

On today's
Bulletin Board

Lost and found

Commuter's Corner













Bulletin Board

Office betting pools not allowed at Lab

Laboratory employees are reminded that gambling of any type, including participating in an office pool for the Super Bowl or other sportings events are prohibited at the Lab.

Administrative Manual (AM 706) states that "Gambling in any form on Laboratory premises, as well as any use of Laboratory equipment for gambling, is prohibited. [This includes] conducting or participating in a lottery or pool, participating in a game for money or property, or selling or purchasing a numbers slip or ticket."

Updated 2/1/05


Skolnik training classes

Skolnik Technical Training Institute will host the following classes:

  • “IPC/EIA J-STD-001 Certification” training class from 8 a.m. to 5 p.m., Feb. 7 - 11, at Skolnik's soldering training facility in Albuquerque. This IPC/EIA J-STD-001 class is designed to provide soldering certification to assemblers, technicians and/or engineers, for end-product acceptance criteria of high reliability electronic assemblies. The tuition fee is $1,149.
  • “IPC-A-610 Re-Certification” class from 8 a.m. to 5 p.m., February 14 - 15, at Skolnik's soldering training facility in Albuquerque, and a two-day “IPC/EIA J-STD-001 Re-Certification” class from 8 a.m. to 5 p.m., Feb. 16 - 17, at Skolnik's soldering training facility in Albuquerque. The tuition fee for the “IPC-A-610 Re-Certification” class is $599, and for the “IPC/EIA J-STD-001 Re-Certification” class is $799.
  • "Basics of Electricity (DC Circuits)" training class from 8 a.m. to 5 p.m., Feb. 15 - 17, at the Howard Johnson Conference Center in Albuquerque. The seminar is designed for technicians, assemblers, engineers, managers and anyone who would like to learn about electricity and electrical components. The training tuition is $1,150.
  • "Solder, Hands-On" training class from 8 a.m. to 5 p.m., Feb. 23 - 24, at Skolnik Solder Training Center in Albuquerque. This class is designed for anyone who would like to learn how to solder or to obtain a refresher in soldering. The tuition fee is $699.  
  • "Enhanced IPC-A-610 CERTIFICATION, Acceptability of Electronic Assemblies": a four-day "IPC-A-610 Certification" training class from 8 a.m. to 5 p.m., March 1 through March 4, at Skolnik’s soldering training facility in Albuquerque. This IPC-A-610 class is designed to provide soldering certification to assemblers, technicians and/or engineers, for end-product acceptance criteria of high reliability electronic assemblies. The tuition is $945.
  • IPC/EIA J-STD-001 CERTIFICATION, Requirements for Soldered Electrical and Electronic Assemblies": a five-day "IPC/EIA J-STD-001 Certification" training class from 8 a.m. to 5 p.m., March 7 through March 11, at Skolnik’s soldering training facility in Albuquerque. This IPC/EIA J-STD-001 class is designed to provide soldering certification to assemblers, technicians and/or engineers, for end-product acceptance criteria of high reliability electronic assemblies. The tuition is $1,149.

If interested in utilizing external auditors in the ESD audit procedures to ensure an unbiased report, Skolnik Technical has the expertise to assist with this process. The audit will be performed by a qualified Electrostatic Discharge Control consultant, certified by the National Association of Radio and Telecommunications Engineers, Inc., with vast experience and knowledge in electrostatic discharge and technical excellence in training, know-how and job performance. Skolnik will verify all facets of the program to ensure that they are in compliance with defined company procedures and will record and report all discrepancies related to the ESD control program. Upon audit completion, Skolnik will compile and review the report with the organization and recommend the appropriate corrective suggestions. Our goal is to effectively help you to continually improve, manage, and sustain a well-organized and successful ESD Control Program.

For more information, go to http://www.skolnik-tech.com/ online or call the registration department at (505) 299-1157.

Updated 2/1/05


ISR Division seminar on today

The International, Space and Response (ISR) Division is hosting a seminar by Jon Medalia of the Congressional Research Office, who has recently published a report on terrorist nuclear attack using oil tankers. The title of his talk is "Port and Maritime Security: Potential for Terrorist Nuclear Attack Using Oil Tankers." The talk is from 1:30 to 2:30 p.m., today, in the Al McKnight Conference Room (The Forum, TA-3, Bldg. 1498, Room 101).

While much attention has been focused on threats to maritime security posed by cargo container ships, terrorists could also attempt to use oil tankers to stage an attack. If they were able to place an atomic bomb in a tanker and detonate it in a U.S. port, they would cause massive destruction and might halt crude oil shipments worldwide for some time. Detecting a bomb in a tanker would be difficult. The CRS report that forms the basis of this talk can be found at http://www.fas.org/irp/crs/RS21997.pdf online (Adobe Acrobat Reader required).

For more information, contact William Priedhorsky of ISR at 7-5204.

Updated 2/1/05


Wellness Center class

Metabolic Syndrome -- Metabolic syndrome is a cluster of heart disease risk factors, including elevated glucose or insulin resistance, low HDL, high triglycerides and high blood pressure. Class participants will learn about the diagnosis, risk and medical treatment options, along with important lifestyle modifications to reduce risk. Team taught by HSR-2 physician Dr. Robert Fritch, registered dietitian Marta Gentry Munger and nurse and health/fitness specialist Phyllis Webb. Noon to 1 p.m., Thursday, Feb. 3 - 17 (3 weeks), Occupational Medicine Conference Room (TA-3, Bldg. 1411).

Health promotion classes are open to the entire Laboratory work force. Register at http://www.wellness.lanl.gov/svc/classes/hp/hp_sch.htm online or call 7-7166.

Updated 1/26/05


Volunteer opportunities

  1. DeVargas Middle School (7-8 graders) in Santa Fe is inviting Lab employees to participate in a Career Fair from 8:30 to 10:30 a.m., Feb. 9. They are requesting as many Lab volunteers as we can provide to share interesting stories, show pictures and discuss their careers. Their format is to have four - 20 minute sessions where students will rotate into classrooms every 20 minutes. For more information, contact Betsy Christensen at 467-3306 / 992-8689 or write to echristensen@mail.sfps.k12.nm.us by electronic mail.
  2. The Youth Development, Inc. Foundation will be hosting their Annual Gala Banquet on April 23 to help raise funds for YDI while also recognizing outstanding clients and friends of YDI. YDI is a private, non-profit organization providing services for children, youth and families in Bernalillo, Sandoval, Valencia, Torrance and Rio Arriba Counties.  For more information, go to http://www.uwcnm.org/organizations/ydi.htm online. Volunteers can be part of the following subcommittees: Logistics (theme, venue, decorations, entertainment and menu); Marketing (invitation, program, signs, publicity, advertising, etc.); Sponsorships and Ticket Sales; Raffle and Silent Auction; or Awards/Recognition Ceremonies. To volunteer, contact Michelle Luna at 242-7306 ext. 18 or write to mluna@ydinm.org by electronic mail.

Employees participating in science and/or math outreach activities may be eligible for Community Service time (paid leave, up to 32 hours per calendar year). For more details and procedures for application (before volunteering), go to http://www-stb-internal.lanl.gov:8080/wosaserver/form?app=comServ online.

The Laboratory Volunteer Program is a Laboratory-approved community relations and support activity. For more information, contact Debbi Wersonick at 7-7870.

Updated 1/31/05


CDS training classes in Albuquerque

Commercial Data Systems is providing Sun, Oracle, Veritas and Linux training classes in Albuquerque. The classes are held at the CDS office, located at 4828 Hardware Drive NE.

For a list of classes, click here (Adobe Acrobat Reader required). For more information, contact Renato Taralli at (505) 314-4017 or write to renato@cdsinc.com by electronic mail.

Updated 1/25/05


Support for tsunami victims

Laboratory Director G. Peter Nanos asked employees to consider how they might assist the victims of the Dec. 26, 2004 earthquake and tsunami in southeast Asia.

To read a all-employee memo, click here (Adobe Acrobat Reader required).

Updated 1/13/05


LabVIEW Data Acquisition courses in Albuquerque

The following LabVIEW Data Acquisition courses will be held from 8:30 a.m. to 5 p.m. at the Quality Inn Suites at 25 Hotel Circle at I-40 and Lomas and Eubank in Albuquerque.

  • Creating Sophisticated Optimized LabVIEW Instrumentation Programs from Scratch - Take any instrument manual sample program in HP Basic or other language, make sure it is a working program by executing the commands to the instrument from the computer keyboard, then convert that program into a working, optimized LabVIEW program. Feb. 3 - 4, $1,000 per person.
  • LabVIEW Intermediate Level Jump-Start Course - Learn more sophisticated LabVIEW programming methods, different LabVIEW programming architectures to suit each task, how to program LabVIEW from within to make LabVIEW panels and controls appear and disappear as needed and other, more sophisticated functions. Feb. 7 - 9, $1,200 per person.

To register for a course, call Don Jordan at (808) 630-3600 or write to interfacing.concepts@att.net by electronic mail.

Updated 1/31/05


National Instruments LabVIEW classes

The following LabVIEW classes are being offered by National Instruments, in New Mexico, during January and March, 2005.

Course Location

Course

Duration

Start Date

Los Alamos

LabVIEW Basics I: Introduction

3 days

March 14

LabVIEW Basics II: Development

2 days

March 17

Albuquerque

LabVIEW Basics II: Development

2 days

Feb. 3

LabVIEW Intermediate I: Successful Development Practices

3 days

Feb. 21

LabVIEW Intermediate II: Performance and Connectivity

2 days

Feb. 24

The LabVIEW Basics I course shows attendees how to develop test and measurement, data acquisition, instrument control, datalogging and measurement analysis applications using LabVIEW. The LabVIEW Basics II course is a logical extension of Basics I and shows how to design complete, stand-alone applications in LabVIEW.

The LabVIEW Intermediate I course teaches structured practices to design, develop, test and deploy LabVIEW applications. The Intermediate II course builds on skills developed in LabVIEW Intermediate I by doing in-depth examination of memory management/performance techniques to extend your ability to develop LabVIEW code to maximizes application efficiency. This training is suggested for LabVIEW users pursuing Certified LabVIEW Developer certification.

LabVIEW users who have not yet attended this LabVIEW training can register for these classes at www.ni.com/training online or by calling toll-free (888) 484-4436. For more information or for a quote, write to Hank.Buterbaugh@ni.com by electronic mail or call (800) 433-3488 ext. 30218.

Updated 1/31/05


Employees leaving Lab must attend termination presentation

Employees who are leaving the Laboratory or changing to casual status must attend a benefits termination presentation held by Benefits (HR-B).

The termination presentations are held every Laboratory pay day for University of California Lab employees. Employees who are retiring aren't required to attend a presentation, but rather, they should schedule a meeting with their designated benefits specialist.

The presentations begin at 8:30 a.m. in room P280 on the second floor of the Otowi Building at Technical Area 3. Pre-registration is required. Employees should register on line at http://hrcluster.lanl.gov/TIOCourses/TIOAha.asp?CourseNumber=21013 one to two weeks prior to their last scheduled work day to sign up for a benefits termination presentation.

Employees also must obtain a departure processing form from Staffing (HR-S) before the presentation. This form is available at http://www.hr.lanl.gov/hrstaffing/Terminations/index.stm online.

At the presentation, employees will receive a packet of information about their benefits and savings balances. They will learn about options to continue or convert insurance plans and distribution options for savings funds.

Employees who require a sign language interpreter should write to benefits@lanl.gov by e-mail three days in advance of the presentation they plan to attend. Or call the benefits office at 5-3842 (TDD).

Because of limited parking, employees should plan to arrive early and/or make alternative transportation arrangements, such as using Johnson Controls Northern New Mexico's ride service.

Updated 10/25/02


Lost and found

Found: a onyx necklace with a bear pendant in the HOV parking lot between the Ad Building and CMR. To claim the necklace, call 7-9774.

Found: one key on green holder marked BWXT #5. Found outside Motorola building on Jan. 24. Please contact Lou at 663-5555 to claim.

Lost: rhinestone pendant, inch wide with chains/rhinestones attached around the Otowi Building at Technical Area 3 on Jan. 19. If found, please contact Belinda Valdez at 5-1364.

Lost: pair of ladies black leather gloves. Hole in the right thumb liner. Perhaps at Canyon Complex, Research Park or in parking lot off Truck route and Pajarito. Contact Veronica at vencinas@lanl.gov if found. They were a gift from my husband.

Lost: Nissan thermal travel mug, stainless steel, on Jan. 13 near entrance to commuter bus lot off of Truck Route. If found, call Chris at 5-6228.

Found: pair of black ear warmers for headphones outside Administration Building (TA-3, SM-43) southwest door. Call Bill at 5-3398 to claim.

Found: four keys at Occupational Medicine, Bldg. 1411. To claim, call Di at 7-7890.

Found: cell phone on Pajarito Road, near intersection of Pajarito Road and Diamond Drive. Call 5-2977 to claim.

Found: gold colored french wire earring near Physics Building. To claim, call Wendee at 7-5724.

Lost: three keys in vicinity of S Compound and CMR parking lot. If found, contact Judy Bell at 7-5886.

Lost: silver ring in downtown area. If found, call Ron at 7-7002.

Lost: five keys on a keyring on Nov. 18, between the hours of 9 a.m. and noon. They were lost in the vicinity of the CMR parking lot and the S compound. If found, call Judy Bell at 7-5886.

Lost: diamond bracelet, TA-3 area (back of Admin. Bldg. to Otowi Bldg). Call Bonnie at 5-1850.


Commuter's Corner

To run an ad, contact the Newsbulletin at newsbulletin@lanl.gov or 7-6103.

Airplane pools

Abiquiu

Albuquerque

Alcalde

Bernalillo

Chimayo

Eldorado

Española

Jemez Springs

Rio Rancho

Santa Fe

Velarde

Commercial Transportation Options

LA Bus Schedules and Fares

Park-and-ride Commuter Bus Service Schedule (pdf)


Questions? Contact the Newsbulletin at newsbulletin@lanl.gov or 667-6103.

 

||||

    
 Los Alamos National Laboratory
Operated by the University of California for the National Nuclear Security Administration,
of the US Department of Energy. Copyright © 2001 UC | Disclaimer/Privacy