Extension cord safety tips

The Consumer Product Safety Commission provides these safety tips for consumers on extension cords, power strips and surge protectors:

• Look for a certification label from an independent testing lab such as UL (Underwriters Laboratories ) or ETL (Electrical Testing Laboratories) on the package and on the product itself. Products with this certification label meet current industry safety standards. For extension cords, look for a permanently attached certification label on the cord near the plug. For power strips and surge protectors, inspect the underside of the casing and make certain that it is marked with the manufacturer's name and the testing lab.
• Use electrical cords, power strips and surge protectors that have polarized plugs with one blade slightly wider the other, or grounded three-pronged plugs. These features reduce the risk of electric shock.
• Use special, heavy duty extension cords for high wattage appliances such as air conditioners, portable electric heaters and freezers.
• Extension cords used outside should be specifically designed for such use to guard against shock.
• Insert plugs fully so that no part of the prongs are exposed when the cord is in use.
• Never cover any part of an extension cord with rugs or other objects while it is in use. If the cord is covered, heat cannot escape, which can result in fire.
• Do not overload cords with too many appliances. Change the cord to a higher-rated one or unplug and relocate appliances to other outlets.
• Make sure cords do not dangle from the counter or table tops where they can be pulled down or tripped over.
• If a cord feels hot to the touch, stop using it and throw it away.
• Replace cracked or worn cords.
• Don't use extension cords to compensate for inadequate home wiring. Use extension cords only when necessary and only on a temporary basis.