Journal Publications
D. L. Clark, S. D. Conradson, D. W. Keogh, P. D. Palmer, B. L. Scott, and C. D. Tait, "Identification of the Limiting Species in the Plutonium(IV) Carbonate System. Solid State and Solution Molecular Structure of the [Pu(CO3)5]6- Ion," J. Inorganic Chemistry, in press.
T. G. George, G. H. Rinehart, E. A. Franco-Ferreira (Oak Ridge National Laboratory, ORNL), and G. M. Goodwin (ORNL), "Platinum-Group Alloys Encapsulate Plutonia Heat Sources for the Cassini Spacecraft," Platinum Metals Review, 41(4) 1997.
Conference Proceedings
The following papers were published in Space Technology and Applications International Forum, American Institute of Physics, Woodbury, New York, 1998: T. G. George and E. M. Foltyn, "Production of 238PuO2 Heat Sources for the Cassini Mission," (pp. 1163-1166); E. D. McCormick, "The Cassini Project: Lessons Learned Through Operations," (pp. 1173-1178); L. D. Schulte, G. L. Silver, G. M. Purdy, G. D. Jarvinen, K. Ramsey, J. Espinoza, and G. H. Rinehart, "Recycle of Scrap Plutonium-238 Oxide Fuel to Support Future Radioisotope Applications," (pp. 1307-1313); K. B. Ramsey, E. M. Foltyn, and J. M. Heslop, "Overview of Advanced Technologies for Stabilization of 238Pu-Contaminated Waste," (pp. 1314-1320); M. A. H. Reimus and J. E. Hinckley, "Radioisotope Thermoelectric Generator/Thin Fragment Impact Test," (pp. 1321-1328); M. A. H. Reimus, G. H. Rinehart, A. Herrera, B. Lopez, C. Lynch, and P. Moniz, "Light-Weight Radioisotope Heater Unit (LWRHU) Impact Tests," (pp. 1329-1337); M. A. H. Reimus, T. G. George, C. Lynch, M. Padilla, P. Moniz, A. Guerrero, M. W. Moyer, and A. Placir, "Nondestructive Inspection of General-Purpose Heat Source (GPHS) Fueled Clad Girth Welds," (pp. 1429-1434).
The following appear in the Proceedings of the 14th Symposium on Space Nuclear Power and Propulsion, CONF-970115, M. S. El Genk, Ed., American Institute of Physics, New York, AIP Conf. Proc. No. 387: M. A. H. Reimus and J. E. Hinckley, "End-on Radioisotope Thermoelectric Generator Impact Tests," 3:1425-1434; M. A. H. Reimus, "High-Silicon 238PuO2 Fuel Characterization Study: Half Module Impact Tests," 3:1435-1442.
Reports and Memos
P. G. Eller, M. P. Eastman (Northern Arizona Univ.), K. D. Abney, W. H. Woodruff, S. A. Kinkead, and R. J. Kissane, "Thermal Decomposition Kinetics of Gaseous Dioxygen Difluoride and Dioxygen Monofluoride," Los Alamos National Laboratory report LAUR-97-4694.
J. M. Haschke, T. H. Allen, L. Morales, D. M. Jarboe, and C. V. Puglisi, "Chloride-Catalized Corrosion of Plutonium in Glovebox Atmospheres," Los Alamos National Laboratory report, LA-13428-MS, February 1998.
D. G. Kolman and J. R. Scully, "The Effects of Mechanics, Microstructure, and Environment on the Oxide Film Rupture Behavior of a Beta-Titanium Alloy Prone to Environmentally Assisted Cracking in Aqueous Chloride Solutions," Los Alamos National Laboratory report LAUR-97-4693.
J. J. Park, D. P. Butt, and C. A. Beard, "Potential Containment Materials for Liquid-Lead and Lead-Bismuth Eutectic Spallation Neutron Source," Los Alamos National Laboratory report LA-13336-MS, November 1997.
J. J. Park, J. J. Buksa, M. G. Houts, and E. D. Arthur, "Preliminary Lifetime Predictions for 304 Stainless Steel as the LANL ABC Blanket Material," Los Alamos National Laboratory report LA-13337-MS, November 1997.
N. G. Pope, W. J. Turner, R. E. Brown, K. Hogan, and R. M. Holt, "A Sweeping System Upgrade Assures Improved Safety and Control for Los Alamos National Laboratory's Plutonium Research Facility," Los Alamos National Laboratory report LAUR-97-5205.
G. Rinehart and E. A. Franco-Ferreira (ORNL), "Welding One-Watt Heater Units for the Cassini Spacecraft," LAUR-97-1003 (submitted to The Welding Journal).
NMT |
LANL |
DOE
Phone Book |
Search |
Help/Info
L O S A L A M O S
N A T I O N A L
L A B O R A T O R Y
Operated by the University of California for the US Department of
Energy
Questions? - Copyright © UC 1996 - Disclaimer 26 June 1996