Return to Measurement Homepage

Introduction to the NHMFL Pulsed Field Facility at LANL

Information on the physical set-up of pulsed field measurements

Read about lock-in amplifiers and their role in your measurements

Information about noise and ways to eliminate it from your measurements

How to collect and evaluate your measurement data

Information on optical spectroscopy

Information about time-resolved optics

Information on de Haas van Alphen Effect measurements

Information on Shubinkov de Haas Effect measurements

Information on Absolute Resistivity measurements

Information on Heat Capacity measurements

Information on RF Penetration Depth measurements

Cryostats


Remember that cryostats are fragile. Our cryostats have epoxy tails that are brittle when cold and diffuse He gas when warm. Therefore, please treat the cryostats with care.

Please, DO NOT allow the cryostat to warm up with He inside! The He will diffuse through the plastic tail and permanently ruin the vacuum.

Also, please make sure the cryostat is aligned precisely with the magnet.